TP2111

Nanopower 300nA, 1.8V, Rail-to-Rail Single Op-amps

Datasheet

TP2111-TP2111N-TP2112-TP2114.pdf

产品特性

  • Ultra-low Supply Current: 300nA Typical/500nA Maximum per Amplifier

  • Stable 10 kHz GBWP with 6 mV/μs Slew Rate

  • Offset Voltage: 1.5 mV Maximum

  • Ultra-low VOS TC: 0.4 μV/°C

  • Ultra-low Input Bias Current: 0.1 fA Typical

  • Unity Gain Stable for 1,000 nF Capacitive Load

  • High 120 dB Open-Loop Voltage Gain

  • Ground-Sensing Input Common-Mode Range

  • Outputs Swing Rail-to-Rail

  • Outputs Source and Sink 20 mA of Load Current

  • No Phase Reversal for Overdriven Inputs

  • Ultra-low Single-Supply Operation Down to +1.8V

  • Shutdown Current: 3 nA Typical (TP2111N)

  • -40°C to 125°C Operation Range

  • Robust 8 kV-HBM and 2 kV-CDM ESD Rating

  • Green, Popular Type Package

典型应用

  • Current Sensing

  • Threshold Detectors/Discriminators

  • Low Power Filters

  • Handsets and Mobile Accessories

  • Wireless Remote Sensors, Active RFID Readers

  • Gas/Oxygen/Environment Sensors

  • Battery or Solar Powered Devices

  • Sensor Network Powered by Energy Scavenging

产品概述

The TP211x are ultra-low power, precision CMOS op-amps that provide a constant 10kHz bandwidth and 10mV/μs slew rate with only 300nA quiescent current per amplifier. The ground-sensing input common-mode range, guaranteed 1.5mV VOS and ultra-low 0.4μV/°C VOS TC enables accurate and stable measurement for both high side and low side current sensing.


The TP211x have carefully designed CMOS input stage that outperforms competitors with typically 0.1fA IB. This ultra-low input current significantly reduces IB and IOS errors introduced in giga-Ω resistance, high impedance photodiode, and charge sense situations. The TP211x are unity gain stable with 1,000nF capacitive load.They can operate from a single -supply voltage of +1.8V to +6.0V or a dual-supply voltage of ±0.9V to ±3.0V, and features ground-sensing inputs and rail-to-rail output.


The combined features make the TP211x ideally suited for a variety of 2-cell NiCd/Alkaline battery or single-Li+ battery powered portable applications. Potential applications include low frequency signal conditioning, mobile accessories, wireless remote sensing, vibration monitors, ECGs, pulse monitors, glucose meters, smoke and fire detectors, and backup battery sensors.For applications that require power-down, the TP2111N has a low-power shutdown mode that reduces supply current to 3nA typically, and forces the output into a high-impedance state.

工具与软件

标题 类型 时间 媒体

设计资源

N/A

样片及购买

样片请点击链接:样片申请

购买请联系公司销售或代理商,请点击链接查看联系方式:联系我们,代理商

样片申请 选型手册
产品交叉替换表