ENGLISH|中 文

首页>产品中心>运算放大器>微功耗运算放大器

纳安功耗运算放大器
微功耗运算放大器
精密运算放大器
零漂移运算放大器
36V轨至轨输出运算放大器
低噪声运算放大器
高速运算放大器
电流检测放大器

TP6004 - 1MHz, 80μA, RRIO, Op Amps

产品特性
  • Supply Voltage: 2.1V to 6.0V

  • Low Supply Current: 80μA  per  channel

  • Rail to Rail Input and Output

  • Bandwidth: 1 MHz

  • Slew  Rate: 0.7V/μs

  • Excellent  EMI  Suppress  Performance

  • Offset  Voltage: ±3mV  Maximum

  • Offset  Voltage Temperature Drift: 2 μV/°C

  • Low  Noise: 27 nV/√Hz  at  1kHz

  • High Output Capability: 100mA

  • –40°C to 125°C Operation Temperature  Range


典型应用
产品概述

The TP600X series are CMOS dual, and quad RRIO op-amps with low offset, low power and stable high frequency response. They  incorporate 3PEAK’sproprietary and patented design techniques to achieve very good AC performance with 1MHz bandwidth, 0.6V/μs slew rate and low distortion while drawing only 500μA of quiescent current per amplifier. The input common-mode voltage range extends 300mV beyond V– and V+, and the outputs swing rail-to-rail. The TP600X family can be used as plug-in replacements for many commercially available  op-amps to reduce power and improve input/output  range and performance.


The combination of features makes the TP600X ideal choices for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy  capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at  the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or  other wide output swing devices in single-supply systems.



产品应用
  • Active Filters, ASIC Input or Output Amplifier

  • Sensor Interface

  • Smoke/Gas/Environment Sensors

  • Portable Instruments and Mobile Device


技术文档
产品数据表
TP6001-6002-6004
应用笔记
其它
3PEAK_Selection Guide