Home>Products>Operational Amplifiers>36V RRO Op-amps

Nanopower Op-amps
Micropower Op-amps
Precision Op-amps
Zero-drift Op-amps
36V RRO Op-amps
Low Noise Precision Op‐amps
High Speed Op-amps
Current Sense Amplifier

TP2604 - Dual, Ultra-low Distortion, 36V RRO Op-amps


 Ultra-low Distortion: 0.0001% at 1 kHz
 Low Noise: 17 nV/√Hz
 High Slew Rate: 6.5 V/μs
 Wide Bandwidth: 10 MHz
 Low Supply Current: 1.2mA per Amplifier
  Wide Supply Range: 2.7 V to 36 V,or Dual-Supply ±1.35 V to ±18 V
  Low Input Offset Voltage: 0.5 mV Typical
  Low VOS TC: 2.0 μV/°C
  Low Input Bias Current: 0.04 pA Typical
  Rail-to-Rail Output Voltage Range
  Unity Gain Stable for 220pF Capacitive Load
  Drive 600 Ω Load
  –40°C to 125°C Operation Range
  Green, Popular Type Package

Typical Application


The TP2604/2608 are ultra-low distortion, high-voltage CMOS op-amps featuring THD+N of 0.0001% at 1kHz. This feature along with its low noise, very high PSRR makes TP260x ideal choices for professional audio equipments. 

The TP2604/2608 are unity gain stable with 220pF capacitive load with a wide 10MHz bandwidth, 6.5V/μs high slew rate, which makes the device appropriate for current-to-voltage converters. 

The TP2604/2608 can operate from a single-supply voltage of +2.7V to +36.0V or a dual-supply voltage of ±1.35V to ±18.0V. Rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. 

The TP2604 is dual channel version available in 8-pin SOIC and MSOP package. The TP2608 is quad channel version available in 14-pin SOIC and TSSOP package. 


 Professional Audio Equipments
 Line Drivers or Line Receivers
 Pre-amplification and Filtering
 PCM DAC I/V Converter
 Transducer Amplifier
 Data Acquisition

Application Notes
TP2604 EVB User Guide
3PEAK_Selection Guide